Climate blocks Novair STS
The climate blocks STS thanks to their reduced thickness, they are ideal for mounting in a suspended ceiling. Section modules, single or double sandwich panels made of 17 mm polyurethane foam, compatible with a suction cup, extra heater and silencer, designed for installation in suspended ceilings. Air flow from 800 to 3,600 m³/h. The mantissa is made of galvanized panels, insulated on the inside with sound and thermal insulation with a closed structure. All panels are easily removed, thus facilitating access to operation. Optional 17 mm thick blocks, insulated with 40 Kg / m³ high density polyurethane foam, can be supplied as a removable panel at the bottom, allowing easy access to the air filter and fan. The condensate bath is made of galvanized sheet metal and has a suitable slope for seamless drainage of condensate. The intake air is filtered from a synthetic regenerative filter with performance class G3. The heat exchanger is made of copper tubes with 2 or 4 rows of aluminum lamellas. The motor used is a single-phase, three-speed 230V, coupled to a double suction blower with forward blades and an air flow rate of 800 to 3600 m3/h.]]>
Наличността се потвърждава при заявка.
Попитайте за наличностСъдействие за избор, монтаж и сервиз: 0878 833 391
Описание
The climate blocks STS thanks to their reduced thickness, they are ideal for mounting in a suspended ceiling. Section modules, single or double sandwich panels made of 17 mm polyurethane foam, compatible with a suction cup, extra heater and silencer, designed for installation in suspended ceilings. Air flow from 800 to 3,600 m³/h. The mantissa is made of galvanized panels, insulated on the inside with sound and thermal insulation with a closed structure. All panels are easily removed, thus facilitating access to operation. Optional 17 mm thick blocks, insulated with 40 Kg / m³ high density polyurethane foam, can be supplied as a removable panel at the bottom, allowing easy access to the air filter and fan. The condensate bath is made of galvanized sheet metal and has a suitable slope for seamless drainage of condensate. The intake air is filtered from a synthetic regenerative filter with performance class G3. The heat exchanger is made of copper tubes with 2 or 4 rows of aluminum lamellas. The motor used is a single-phase, three-speed 230V, coupled to a double suction blower with forward blades and an air flow rate of 800 to 3600 m3/h.]]>